PLEASE ALSO NOTE: One must be certified in current Ventilation certification with TECA to use this software and is not available for download on our web site. Please allow 2 to 3 weeks for delivery.

This program is a computerized version of TECA's Mechanical Ventilation Checklists from our Ventilation Guidelines Manual (Updated 2015). This software, like the Checklists, is ONLY available to those who have successfully completed the new Ventilation Guidelines Course and have been issued a Ventilation certificate. You must provide your current (2012) Ventilation Certification Number in the ''Vent Stamp'' area below to order this program.

The programs will produce Type 1 (Forced Air), Type 2 (HRV), Type 3 (CRV), or Type 4 (Small Dwelling) Checklists. Simple step-by-step procedures will guide you through an input sheet and will produce a print-ready output page virtually identical to the Checklists contained in your TECA Ventilation Guidelines manual.

Note: previous checklist versions (Type A, B, or C are no longer valid).

Program Features:

• Automatic CFM calculation. Just enter floor areas, ceiling heights and bedrooms and the program calculates CFM.
• Make-up Air System Requirements are calculated when required by larger exhaust fan installations. Duct heater size is automatically calculated.
• A selection of commonly used fans and HRVs has been pre-entered, so you can easily select exhaust fans from drop down menus that will give CFM, SP, and Sones. The user can enter fan data for any fan not shown.
• Ductwork details will advise you if ducts are under-sized or too long.
• Various features will alert you to fans that are too noisy or have insufficient air volumes.

Computer Requirements:

TECA's Quality First programs are provided on CD/DVD to run using MSExcel  2010 (.xlsx extension). You must have Excel 2010 or newer spreadsheet software installed on your PC in order to use this program